您好,欢迎光临张家港金米兰德龙机械有限公司网站! Language:English

视频中心

Good luck pig-好运猪-284-20181231

Good luck pig-好运猪-284-20181231

 

 

 

 

木材雕刻机报价,激光刻字机价格多少,木材激光雕刻机,木材激光切割机
木材雕刻机价格,木材激光刻字机价格多少,木材激光雕刻机厂家,木材激光切割机价格
小型激光刻字机价格,激光雕刻机价格,小型木材雕刻机,大型激光雕刻机
co2小型激光刻字机价格,CO2激光雕刻机价格,小型木材雕刻机价格,大型激光雕刻机价格
激光刻字设备,co2激光刻字设备,激光雕刻切割机价格
激光刻字设备厂家,co2激光刻字设备厂家,co2激光雕刻切割机价格
木材切割雕刻,木材激光切割雕刻,co2木材切割雕刻,木材co2激光切割雕刻;
凹片雕刻,木质凹片雕刻,木质凹片雕刻机,co2木质凹片雕刻,木质凹片激光雕刻
凸版雕刻,木质凸版雕刻,木质凸版雕刻机,co2木质凸版雕刻,co2木质凸版雕刻机;
玻璃切割雕刻,玻璃激光切割雕刻,玻璃木材切割雕刻,玻璃co2激光切割雕刻;


木质激光雕刻机:

木材激光雕刻机一般用于木材加工的切割和雕刻,木质材料激光雕刻形式可分为切割雕刻、凹模雕刻和凸模雕刻三种。激光雕刻的材料去除原理与激光切割相同,多条未切透的切槽连在一起就形成成面积的材料去除。激光切槽的横截面呈“V”形,切割速度越低、激光电流越大,切槽宽度和深度也越大,其中切割速度和激光电流对切槽深度的影响程度比对切槽宽度大得多。

木质材料激光雕刻加工的基本原理与激光切割加工基本相同,都是利用高能量密度的激光束转化为热能,瞬时引起木材热分解和炭化,从而去除部分材料。激光切割是将木质材料(主要是板材)的不同部分分离开,而激光雕刻是在木质材料的表面加工出要求的图 案、花纹和文字等。对同一木板讲,激光切割所需的能量较大,而激光雕刻由于不需要切透工件,故所需的能量相对较小。激光雕刻是非接触式加工方法,与传统机械加工方法相比具有无木屑污染、无刀具磨损也不需更换刀具、无噪声污染(噪声很低)等优点。激光切割头聚焦透镜将激光聚焦至一个很小的光斑,光斑直径一般为0.1~0.5mm。激光束焦点位于待加工表面附近,用以熔化或汽化被加工材料。与此同时,与光束同轴的气流由切割头喷出,将熔化或汽化了的材料由切口底部吹出。

技术优点:

金米兰激光研发团队从根本上解决因激光设备对各类木材料雕刻切割时出现的速度慢、雕刻深度浅、切割边锯齿状、边线不光滑等缺点。同时可以采用视觉定位等最新技术有效解决精密切割、高速雕刻技术难题。

Wood engraving machine offer, laser engraving machine price, wood laser engraving machine, wood laser cutting machine
Wood engraving machine price, wood laser engraving machine price, wood laser engraving machine manufacturer, wood laser cutting machine price
Small laser cutting plotter price, laser engraving machine price, small wood engraving machine, large laser engraving machine
Co2 small laser cutting plotter price, CO2 laser engraving machine price, small wood engraving machine price, large laser engraving machine price
Laser engraving equipment, co2 laser engraving equipment, laser engraving and cutting machine price
Laser engraving equipment manufacturers, co2 laser engraving equipment manufacturers, co2 laser engraving and cutting machine prices
Wood cutting engraving, wood laser cutting engraving, co2 wood cutting engraving, wood co2 laser cutting engraving;
Grooved engraving, wood concave engraving, wooden concave engraving machine, co2 wooden concave engraving, wooden concave laser engraving
Letterpress engraving, wood letterpress engraving, wood letterpress engraving machine, co2 wood letterpress engraving, co2 wood letterpress engraving machine;
Glass cutting engraving, glass laser cutting engraving, glass wood cutting engraving, glass co2 laser cutting engraving;
Wood laser engraving machine:

Wood laser engraving machine is generally used for cutting and engraving of wood processing. The laser engraving form of wood material can be divided into three types: cutting engraving, concave engraving and punching engraving. The principle of material removal by laser engraving is the same as that of laser cutting. A plurality of uncut slots are joined together to form an area of material removal. The cross section of the laser grooving is "V". The lower the cutting speed, the larger the laser current, the larger the grooving width and depth. The cutting speed and laser current affect the grooving depth more than the grooving width. Much more.

The basic principle of laser engraving of wood materials is basically the same as that of laser cutting. They use high-energy density laser beams to convert into thermal energy, which instantaneously causes thermal decomposition and charring of wood to remove some materials. Laser cutting separates different parts of the wood material (mainly the board), while laser engraving processes the required patterns, patterns and text on the surface of the wood material. For the same board, the energy required for laser cutting is large, and laser engraving requires relatively little energy because it does not need to cut through the workpiece. Laser engraving is a non-contact processing method. Compared with traditional machining methods, it has the advantages of no wood chip contamination, no tool wear, no need to change tools, no noise pollution (low noise). The laser cutting head focusing lens focuses the laser to a small spot with a spot diameter of typically 0.1 to 0.5 mm. The focus of the laser beam is located near the surface to be machined to melt or vaporize the material being processed. At the same time, the airflow coaxial with the beam is ejected by the cutting head, and the melted or vaporized material is blown out from the bottom of the slit.

Technical advantages:

The Kingmilan laser R&D team fundamentally solves the shortcomings of slow speed, shallow engraving depth, jagged edges and unsmooth edges caused by laser equipment for various types of wood materials. At the same time, the latest technologies such as visual positioning can be used to effectively solve the problems of precision cutting and high-speed engraving.

在线观看视频建议:
1、在有无线wifi环境下观下,更加流畅; 
2、打开视频后,因为网络流量原因,可以等待一会进行视频缓冲,通过进度条可以动态观察缓冲情况,利于更加流畅观看; 
3、也可以进入Kingmilan Laser官方YouTube进行观看,https://www.youtube.com/channel/UCNbpZhLIdAvvj9N0AtqpTvQ?view_as=subscriber;请订阅Kingmilan Laser 官方YouTube,里面有更多培训及应用视频。

4、任何建议,请与Sales@4008874458.com,或与13390833836,13338036882,13338036889,我们非常感谢;

5、请把本培训视频网页进行收藏或网页添加到书签中,这个很重要;


Watch video suggestions online:
1, in the wireless wifi environment, more smooth;
2. After the video is opened, because of the network traffic, you can wait for a video buffer. You can dynamically observe the buffer status through the progress bar, which facilitates smoother viewing.
3. You can also watch it on the official YouTube of Kingmilan Laser,https://www.youtube.com/channel/UCNbpZhLIdAvvj9N0AtqpTvQ?view_as=subscriber Please subscribe to official YouTube of Kingmilan Laser for more training application videos

4. Any suggestion, please contact Sales@4008874458.comsa-assistant07@4008874458.com,,WhatsApp/Tel:+86-13390833831,13338036880,we are very grateful;

5. Please add this training video web page to your bookmarks or bookmarks. This is very important;


Good luck pig-好运猪-284-20181231*必填项

  • 联系人: 请填写您的真实姓名 *
  • 手机号码: 请填写您的联系电话 *
  • E-mail:
  • 采购意向简述: *
  • 请填写采购的产品数量和产品描述,方便我们进行统一备货。
  • 验证码:
上一条:Sushi box laser cutting-寿司木盒激光切割-283-20181231    下一条:没有了!
关闭×
loading...
loading...
loading...

金米兰特色服务

北京-13390833832
上海-13328035658
山东-13338036882
浙江-13338036883
江苏-13338036889
安徽-13390833836
福建-13390838052
监督-13390833831

金米兰喷码机*必填项